The following is a comprehensive solution to the problems that occur when the throat clamp is mechanically wound:   1. Buckle stuck problem Buckle deformation repair   If the buckle at the head and tail of the throat clamp is lifted due to processing vibration, causing the steel belt to be unable to shrink, you can use a screwdriver or hard metal tool to press the lifted part back to its original position to ensure that the buckle is aligned with the steel belt through hole1.   Adjust the steel belt tension   Appropriately adjust the steel belt tension to avoid buckle stuck due to insufficient tension. The tightness of the steel belt can be fine-tuned by loosening the fixing screws, or by replacing the tension adjustment device.   2. Steel belt bending problem 1 Correcting steel belt bending   If the top of the steel belt presses against the screw rod cap and cannot be tightened, the top of the steel belt needs to be bent downward to remove the obstruction to the screw rod cap.   3. Material-related issues Stainless steel throat clamp processing   Stainless steel throat clamps are more difficult to handle when the buckle is stuck due to the high hardness of the material. It is recommended to use special tools (such as hydraulic jacks) to press the buckle from below, or contact professional maintenance personnel for processing.   IV. Preventive measures Regular maintenance: Check the connection between the buckle and the steel belt, and repair processing defects in time;   Standard operation: Use special tools to tighten the screws to avoid deformation caused by excessive force;   Material selection: Select the appropriate material according to the use scenario to avoid hard materials such as stainless steel from getting stuck due to brittleness.   The above methods can effectively solve the problems of stuck and bending when the throat clamp is mechanically wound, ensuring the use effect. Tags: #hoseclamp #factory #automatic   

Xiame Frand Intelligent Equipment Co.,Ltd. always aim at offering best quality of products with competitive value for our gloabl business parteners, and we are loading 3 containers of American Hose Hoop Machine to usa.      

The company's holiday arrangement is as follows:   All employees will be on vacation from February 7th to February 18th, 2021   Return to work on February 19 and return to work on February 21 (Sunday).   I wish all staff a happy Spring Festival and all the best!

Army Day is the anniversary of the founding of the Chinese People's Liberation Army. It is set on August 1 every year and is established by the Chinese People's Revolutionary Military Commission to commemorate the founding of the Chinese Workers' and Peasants' Red Army. Xiame Frand Intelligent Equipment Co.,Ltd. wishes the 95th anniversary of the founding of the Chinese People's Liberation Army. The company's main hose hoop machine,TYRE VALVE MACHINE,LOCKSET MAKING MACHINE, and other automation equipment, welcome to consult.

Hose clamps are widely used in motor vehicles, pharmaceuticals, sewage treatment purification and dust removal, auto parts and other machines, especially suitable for connection of middle and high-end models or parts of anti-corrosion materials. The hose clamp is relatively small and its value are also small, but its role is huge. It has a wide range of applications, torsion and pressure resistance, balanced torsional torque, firm and tight locking, a large adjustment range, and a beautiful appearance after assembly.

What is the difference between American hose clamp and German type hose clamp? A lot of people have this question, the following is to sort out the difference, you can have a look: 1.American hose clamp steel belt thread is through hole, German is ancient concave. 2.The width of the American steel belt is 12.7mm, small American style is 8MM,(equal to and less than 27 is small American style, the other is large American style), German type is 9MM and 12MM two. 3.The American screw head hexagon is 8MM, the German is 7MM. 4.The American twist is relatively lower than the German twist. 5.There is not much difference in other usages.

The commonly used materials for American hose clamps are: stainless steel (201/304/316), and the surface of carbon steel is plated with white zinc. Because the occlusal groove of the American hose clamp steel belt is passed through, and the teeth of the screw are embedded, so it is more powerful and precise when locked. But because the steel strip is self-permeable, the steel strip is easy to break when the pulling force is strong. This tensile performance is relatively stronger than the German hose clamp. The hose clamp is widely used in the leather hose connection of automobile pipelines, water pumps, fans, food machinery, chemical machinery and other industrial equipment. The occlusal groove on the steel band of the American hose clamp is transparent, hollowed out and stamped, and has two groove shapes,  rectangular hole and willow leaf hole. The worm wheel screw on the hose clamp, the thread is embedded in the groove, and the screw is generally used to tighten the diameter of the steel belt of the hose clamp, so as to achieve the locking effect.

Hose clamps are mainly divided into three types: British style, American style and German style. In addition, there are other derivative products such as pipe bundles and European standard hose clamps. English hose clamp: the material is galvanized, commonly known as iron galvanized, with moderate torque, cheap price and wide application range. German hose clamp: the material is iron, the surface is galvanized. The buckle is stamped and formed, with high torque and moderately high price. The market share is low due to the high cost of production. American hose clamps: divided into two types: galvanized iron and stainless steel. The main difference is that the buckle distance is perforated (that is, through the eye buckle). The market is mainly made of stainless steel, which is mainly used in high-end markets such as auto parts. Its price is higher than the other two.

There are many types of hose clamps, and different hose clamps have different effects. The general material of the hose clamp is iron and stainless steel. The specification and model can be customized at the same time. It plays a very important role. It is the top priority of the hose connection and hard pipe connection. Its role is to lock the connection to make it more tightly sealed, and there will be no air or water leakage. In the past, people always used iron wire to secure the connection, but the tightness of the iron wire is limited. When it is tight to a certain extent, the iron wire will break and become useless. The current application of hose clamp is the same as that of iron wire fastening, but it solves the disadvantages of insufficient fastening force and small contact area. In the industry, no matter what the connection is, it is inseparable from the appearance of the hose clamp. The importance of the hose clamp in the industry is obvious.

When purchasing a hose clamp, if you need a 70mm clamp, you should choose a clamping range between 50mm and 70m when you choose, and subtract 20mm from the maximum range. This is the most basic feature, and it is also clearly stipulated in the relevant standards. If the environment used has special requirements, or the connected pipeline is special, then it needs to be customized, and a series of parameter data should be provided to the manufacturer, so that the manufacturer can design a special and targeted product. When people buy things, they like to buy cheap ones. They always want to find high-quality and cheap products. In fact, the price is not the only factor that determines the characteristics of the product, but it is necessary to pay attention when buying hose clamps. The lower the price, the lower the price. Indicates that certain aspects of the product cannot meet the requirements. Especially in some projects, many people in charge of procurement ask online where is the cheapest one. In fact, there are many cheap hose clamps on the market that are sold after refurbishment. The domestic recycling mechanism is not perfect. Many people treat unusable products as scrap iron or scrap gold, and some people simply refurbish those products that are not seriously damaged, and then sell them.

Since the appearance of stainless steel, this special metal material has been widely used in various industries, and it has rapidly flooded into all aspects of people's lives, including various mechanical products. In hardware accessories, the hose clamp is currently the most widely used type, especially the stainless steel hose clamp, which is highly praised by people because of its particularity and good adaptability, and its superior performance in some industries is even better than others. For example, the stainless steel hose clamp used in the intermediate frequency furnace is not easy to heat up, which can effectively improve the problem of overheating of its connecting parts. The main reason why the stainless steel hose clamp does not conduct heat on the intermediate frequency furnace is that stainless steel is not magnetically conductive, but when the motor coil heats up, because its main material is copper, it is not magnetically conductive, but it will also generate heat when the current passes. The rotor in the motor is wound with copper wires, so it does not conduct heat in the case of electromagnetic induction, but if there is a current passing through it for a long time, it will also generate heat and need to be cooled. These are two different situation. The situation of heat generation should be treated differently, and the role of stainless steel hose clamps in it is also different. What we need to pay attention to is that in different situations, we need to treat it in different ways, and when it needs to be cooled, it should be done in time to avoid damage to the machine caused by excessive temperature.

We are professional in design and manufacture automatic assembly hose clamp machine with 11 years of experience American type hose clamp machine is the most automation to manufacture different types and sizes of hose clamps in the world so far. Our machine is non-standard customized product, with these advantages just like standardized production, higher end product quality and lower labor cost. Our technology of automatic assembly hose clamp machine is mature and reliable. The production efficiency is 1000pcs/hour more or less and working accuracy are all much higher than handmade, therefore satisfying the production requirements of new generation manufactures of hose clamp. An automatic assembly hose clamp making machine can be designed as multi-size according to client's requirement. Maybe three or six different sizes in one machine is available if the structure of clients' hose clamp allowed. The same as another many parameters of machine, free torque and broke torque of hose clamp can be customized. Our flexibility customization design to ensure all customer's requirements are met. Compared with the traditional manual control manner, this machine has many advantages such as stable and simple operation. Working content is only adding semi-finished product material. The production is controlled by PLC microcomputer which will records all data and it equipped with human-computer interface to make sure most all the technical parameters can be set on the touch screen.