Dear Valued Clients & Partners, As the curtain falls on another remarkable year and we usher in the bright promise of a new one, the entire team at FRAND would like to extend our warmest New Year greetings to you and your beloved ones. This festive season is a perfect time to reflect on the profound trust and fruitful collaborations we've shared, and to express our deepest gratitude for your unwavering support in our journey as a professional non-standard customized equipment manufacturer. Over the past year, we have been privileged to stand alongside you, turning your unique production needs into tangible, high-performance equipment solutions. From tailored production lines to specialized machinery that fits your exact workflows, our commitment to precision, innovation, and customer-centricity has always been at the heart of everything we do. We take immense pride in the fact that our non-standard customized equipment has helped streamline your operations, boost efficiency, and drive growth for your businesses. Each project we undertake is a testament to our dedication to understanding your challenges and delivering solutions that exceed your expectations. As we step into the new year, we are more excited than ever to embrace new opportunities and tackle new challenges hand in hand with you. We will continue to invest in advanced technologies, refine our R&D capabilities, and enhance our service system to provide you with even more reliable, flexible, and cost-effective non-standard customized equipment solutions. Whether you are looking to upgrade existing machinery, build a new production line from scratch, or address specific operational pain points, our team of seasoned engineers and technicians is ready to collaborate closely with you to turn your ideas into reality. The new year brings with it endless possibilities, and we are deeply grateful for the chance to be your trusted partner in realizing these possibilities. Your success is our success, and we are committed to going the extra mile to ensure that our collaboration remains mutually beneficial and rewarding. Once again, we wish you and your team a joyful, healthy, and prosperous New Year. May the coming year be filled with new achievements, boundless opportunities, and lasting happiness. We look forward to continuing our journey of growth and success together! Warm regards, FRAND TEAM Xiamen Frand Technology Co., Ltd Specialized in Non-Standard Customized Equipment

As the festive season approaches, we take this moment to reflect on the year that has passed and extend our warmest wishes to every member of our team. Christmas Eve marks a special time of year when we come together to celebrate our achievements and look forward to the opportunities ahead.     Celebrating Our Collective Success This year has been filled with remarkable accomplishments, and none of it would have been possible without the dedication and hard work of each individual in our organization. Your commitment to excellence has been the driving force behind our success, and for that, we are truly grateful.     Wishing You Peace and Joy On this Christmas Eve, we hope you find time to relax, recharge, and create beautiful memories with your loved ones. May this holiday season bring you warmth, laughter, and moments of pure joy. Whether you're gathered around a festive table, exchanging gifts, or simply enjoying the quiet magic of the evening, we wish you all the happiness this season has to offer.   Looking Ahead with Optimism As we prepare to welcome the new year, we're filled with excitement for what lies ahead. The foundation we've built together this year positions us for even greater achievements in the coming months. We look forward to continuing our journey together, building on our successes and embracing new challenges. 13 16 A Note of Appreciation To our incredible team: thank you for your unwavering dedication, your innovative spirit, and your commitment to making our company great. You are the heart of our organization, and we are honored to work alongside you each day. Wishing you and your families a Merry Christmas and a prosperous New Year filled with health, happiness, and continued success! Warmest regards, FRAND Team

Mangote hose clamps are essential components used in a variety of industrial and automotive applications to secure hoses and tubes in place. Their primary function is to provide a reliable and leak-proof connection between hoses and fittings, ensuring safe and efficient transfer of fluids or gases. One of the main features of Mangote hose clamps is their ability to accommodate different hose sizes and materials. Made from durable materials such as stainless steel or galvanized steel, these hose clamps are corrosion-resistant, abrasion-resistant, and suitable for both indoor and outdoor use. This durability is especially important in environments with frequent exposure to harsh chemicals or extreme temperatures. Mangote hose clamps are designed for easy installation and adjustment. They typically feature a screw mechanism that tightens the hose clamp around the hose for a secure fit. This adjustability is critical because it allows the user to achieve the best possible seal, preventing leaks that could result in costly downtime or equipment damage. In addition to their primary function of securing hoses, Mangote hose clamps also play a role in maintaining system integrity. By ensuring hoses are securely connected to fittings, these hose clamps help prevent disconnections that could lead to leaks or system failures. This is especially important in applications such as automotive fuel systems, hydraulic systems, and irrigation installations, where even a small leak can have serious consequences. In addition, Mangote hose clamps are versatile and can be used in a variety of applications from household plumbing to heavy machinery. Their reliability and effectiveness make them the first choice of engineers and technicians. In conclusion, Mangote hose clamps do more than just connect hoses. They are essential to ensuring the safety, efficiency, and reliability of a wide variety of systems, making them an indispensable tool in many industries.

What is a Hose Clamp? A hose clamp is designed to secure a hose over a fitting, by clamping the hose  down, it prevents the fluid in the hose leaking at the connection. Popular attachments include anything from car engines to bathroom fittings. However, hose clamps can be used in a variety of different industries in order to secure the transportation of products, liquids, gases and chemicals. There are four overarching categories of hose clamp; screw/band, spring, wire and ear. Each different hose clamp is used depending on the type of hose in question and the attachment at the end.   How Do Hose Clamps Work?   A hose clamp is firstly attached to the edge of a hose.   This edge of the hose is then placed around a chosen object.   The clamp now needs to be tightened, securing the hose in place and ensuring that nothing from inside the hose can escape.    Caring for your Hose Clamp   Don’t over tighten your clamps, as this can cause serious pressure problems later on.   As hose clamps come in a range of sizes, make sure your chosen clamps are not too big. Whilst too-large clamps may potentially still do the job just fine, they can be both aesthetically displeasing, as well as pose a safety risk.   Finally, quality is key; be sure not to scrimp on your hose clamps and their installation if you want to guarantee durability.

There are many kinds of hose clamp, and different hose clamp have different functions. General material of hose clamp is iron and stainless steel, specifications can be customized specifications at random, at the same time in the regulation of its role is very big, is as the pinnacle of hose and hard tube connected to a tube will have it, it is the role of locking joint, make its seal progressively tighter, there would be no air leakage phenomenon. As before when people connect always can use iron wire to try firm, but the tightness of iron wire is limited, tighten to a certain degree of iron wire will produce disconnection phenomenon, will become useless, its force surface is very small, will scratch the surface of the hose. The application of throat band is the same as the fastening of iron wire, but it solves the problem that the fastening force cannot reach and the contact area is small. In the industry, no matter what the joint, is inseparable from the emergence of throat band, throat band in the industry can clearly know the importance of! The following is a brief introduction to the features and uses of the American throat band The American throat band is divided into: 8mm bandwidth American type hose clamp, 10mm bandwidth American type hose clamp and 12.7mm bandwidth American type hose clamp. According to the steel band bandwidth -8mm,10mm,12.7mm and 14.2mm.Material isW1,W2&W4,W5 For easy fastening, you can also change the screw into a handle type, so that the operation is more convenient and fast. Its steel belt hollow-out design, can make the screw tightly gnawing the steel belt, the strength will be greater when being fastened, wide use, can be conveniently used for some large volume, outdoor equipment strapping.

Worm Drive Hose Clamp is also called German type hose clamp.German hose clamp is a kind of fastener used for connection. It is very small, but it plays a huge role in the fields of vehicles and ships, chemical oil, medicine, agriculture and mining. Hose clamps currently on the market include American hose clamps, British hose clamps and German hose clamps. The German hose clamp has great resistance to twisting and pressure during use, which can achieve a very tight fastening effect. And after the assembly is complete, the appearance is very beautiful. The production cost of the German type hose clamp is relatively low. Its material is galvanized steel and stainless steel. In order to achieve a large torque, the stamping distance is generally formed by stamping. The bandwidth is 9 mm and 12 mm. Secondly, the German hose clamp has excellent performance, its friction is very small, and it has a wide range of applications. When some high-grade or special parts with high requirements are connected, only the German hose clamp can meet the requirements, which can be tightly locked and beautiful.The materials used in German hose clamps can be divided into carbon steel and stainless steel. In view of the excellent quality of stainless steel, stainless steel German hose clamps are more common in the market. The reason why it can be accepted and promoted by the market naturally has its own unique advantages.Compared with flanges, although the functions of the two are the same, the installation of stainless steel hose clamps is fast, simple and reliable because it does not require welding and hole-to-hole locking; no welding and other operations are required during the construction process, and the installation cost is more than the usage flanges wants to be economical. Without welding, products such as welding slag will not be produced, and there will be no pipe blockage. Basically, there is no pollution in the city.

Flexibility is a key feature of modern German-type hose clamp assembly machines. These non-standard customized systems can be configured to produce 2-4 different clamp sizes in one unit, provided the clamp structure allows . Parameters like free torsion (≤0.4) and destructive torsion (over 13.56 N/m) can also be tailored to meet specific client requirements, ensuring versatility across industries.

Generally, the horizontal drainage pipe and the first floor exit pipe should adopt A-type pipe, and the drainage stand pipe and drainage branch pipe should adopt W-type pipe. The advantage of such a combination is that the A-type pipe has better mechanical properties due to the flange gland connection, and when used as the drainage horizontal pipe, the service life and use function can be guaranteed.  At the same time, due to its good mechanical strength, it is especially suitable for high-rise drainage and exit horizontal pipes, which can withstand the impact of upper-layer water. Due to the quick installation and the good flexibility of the interface, the W-shaped pipe is suitable as the material of choice for the drainage riser, especially as the installation and construction of the drainage horizontal branch pipe in the toilet and bath room. The good flexibility and tightness of the interface can be used The slope of the drainage pipe is well controlled.  At the same time, due to the characteristics of W-shaped pipe connectors, combined with the current status of completion and decoration of current residential projects (usually the drain risers of toilets and baths are exposed), when the riser concealed decoration is carried out, it is convenient to decorate and arrange, which can save space and increase Actual use area. In addition, the use of A-type and W-type pipes in combination, in addition to the above reasons, is also because the remaining short material generated during the installation of the A-type pipe can be used as the installation of the ground drainage horizontal branch pipe, saving materials and having a good economy benefit. The connection of W-shaped pipe adopts stainless steel hose clamps for connection construction. The stainless steel hose clamp is composed of rubber sleeve, hose clamp, perforated rolling shaft and bolts.   In the actual installation project, the above-mentioned two kinds of pipes have a good effect in combination, which can not only meet the needs of construction quality and use function, but also save materials and reduce costs.  

Xiame Frand Intelligent Equipment Co.,Ltd. always aim at offering best quality of products with competitive value for our global business partners, and we are loading 3 containers of American Hose Hoop Machine to USA.      

For manufacturers seeking scalability, German-type hose clamp assembly machines deliver an impressive output of 1000 pieces per hour . Equipped with PLC controls and synchronized workflows, the machines minimize manual intervention, streamlining the transition from raw metal strips to fully assembled clamps. This efficiency not only meets high-volume production demands but also reduces lead times significantly.

Flexibility is a key feature of modern German-type hose clamp assembly machines. These non-standard customized systems can be configured to produce 2-4 different clamp sizes in one unit, provided the clamp structure allows . Parameters like free torsion (≤0.4) and destructive torsion (over 13.56 N/m) can also be tailored to meet specific client requirements, ensuring versatility across industries.

Challenge: A major European automotive Tier 1 supplier faced bottlenecks in their hose clamp assembly process, struggling with labor-intensive manual operations, inconsistent quality, and inability to meet rising demand for electric vehicle (EV) components.   Frand’s Solution: We designed a fully automated, modular assembly line integrating:   Robotic Feeding Systems: For stainless steel bands and bolts, eliminating manual material handling. Vision Inspection Units: 100% real-time defect detection (e.g., cracks, burrs) using AI-powered cameras. Smart Conveyors: Automated sorting of finished clamps by size and batch, reducing packaging time by 40%. Results:   Productivity: Output increased from 500 to 1,100 clamps/hour. Quality: Defect rate dropped from 2.3% to 0.08%. Cost Savings: Labor costs reduced by €120,000/year; energy consumption cut by 22% via variable frequency drives. Client Testimonial: “Frand’s solution wasn’t just equipment—it was a strategic partnership. Their team worked closely with ours to understand our EV-specific needs, delivering a line that scales with our growth.” – Production Manager, European Automotive Supplier