• Medical Pollution Mask Making Machine With Aluminium Alloy Structure

Medical Pollution Mask Making Machine With Aluminium Alloy Structure


  • size : 6500 (length) * 3500 (width) * 1950 (height)
  • Weight Total equipment weight : ≤5000KG Ground load 3500KG / ㎡
  • Production efficiency : ≥100PCS/min
  • The product qualification rate : 99%
  • Product Detail

    FAQ

    Product Tags

    What is automatic face mask making machine

     

    The Disposable Non Woven Mask Machine Full Automatic New Products Surgical used Backed by a team of adroit professionals, we are manufacturing, importing and supplying an extensive quality Non Woven Face Mask Making Machine. A special design for producing 2D masks with ear loop. PLC control system, full automatic from raw material, attaching nose wire, embossing, folding and folding, shape sealing and cutting, then turn over the mask body into loop sealing machine. The final product is a finished mask, wait for a worker to collect and pack.

     

    The equipment is used to produce a disposable non-woven mask. The equipment is mainly composed of feeding, shaping, welding, cutting, connecting and transferring, polar ear welding, blanking and stacking, etc. In addition to manual feeding, the whole process from the raw material feeding to the nose rib insertion edge cutting finished product stacking is fully automatic operation. The machine can be combined by one pull one or one pull two-pole ear welder to meet different production capacity requirements

    Technical Parameters
    Import raw materials, automatic feeding, nose line cutting / feeding, hemming welding, folding scene, forming welding, photoelectric detection, automatic slicing, finished product output, receiving tray sorting, full automation

    No.

    Name Parameter
    1 size 6500 (length) * 3500 (width) * 1950 (height)
    2 Weight Total equipment weight ≤5000KG Ground load 3500KG / ㎡
    3 Color Color Sheet metal warm gray 1C, primary color of aluminum profile
    4 Working power supply 220VAC ± 5% 50HZ grounding protection Rated power ≤10KW (including welding machine)
    5 Compressed air 0.4-0.6MP (clean water after dewatering, no oil, filtration, pressure stabilization), use flow rate is about 300L / min
    6 Production efficiency ≥100PCS/min
    7 The product qualification rate 99% (except for the original material and human operation)
    8 Main accessories Cylinder: AirTAC Screw guide rail: HIWIN / TBI PLC: Mitsubishi or Xinjie
    9 Operating environment General workshop environment is acceptable (no corrosive odor, no dust)

     

    Item

    Material Specification Coil outer diameter Coil inner diameter
    1 Outer non-woven fabric 200mm wide roll material Recommended less than 600mm greater than 65mm
    2 Inner layer non-woven fabric 190mm wide roll material Recommended less than 600mm greater than 65mm
    3 Melt tape 175mm wide roll material Recommended less than 600mm greater than 65mm
    4 Nose bridge strip 3.0mm wide roll material Recommended less than 400mm greater than 65mm
    5 ear straps 2.8mm round coil

    Feature

    1. Aluminium alloy structure is adopted, which is beautiful and firm without rust.
    2. Computer PLC programming control, high stability, low failure rate and low noise.
    3. Servo motor imported from Taiwan, stepper motor drive, high precision.
    4. Photoelectric detection of raw materials to avoid mistakes and reduce waste.
    5. This equipment can supply 2 inner ear strap machines or outer ear strap machines.
    6. The machine adopts pulleys and fixed feet, which is convenient and fast to move, strong in fixation and unshakable.
    7. This model is equipped with a new advanced conveyor belt, which automatically collects products with high accuracy, and only needs to be sorted and packed.

    technical parameter

    1. The length, width and height of the machine: the size of the whole machine is subject to the actual 6500MM * 3500MM * 1600MM
    2. Voltage: AC220V 50-60HZ
    3. One-to-two production efficiency: more than 100 pieces / min
    4. Power: 3.5KW


  • Previous:
  • Next:

  • Q1: Are you a factory or a trading company?

    A1: We are factory manufacturing packaging machines and weprovide perfect OEM and after-sale service.

    Q2: How can I know your machine works well?

    A2: Before delivery, we shall test the machine working condition for you.

  • Write your message here and send it to us